Motogadget Motoscope Pro BMW R9T

Availability: 3 to 5 days

The motoscope pro BMW R9T only plug&ride instrument on the market.

The CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug&ride solution and a very easy installation.

A LED matrix display enables an ultra-thin housing design. 734 LEDs, controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analog LED band with a drag indicator function. Main and secondary displays are user-configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals.

The billet aluminum casing is CNC-machined and is easily mounted by two backsides threaded holes. The instrument is equipped with an ABE approval.

Compatible with BMW R nineT Model 2014-2016 and 2017-2023

The kits are already completely wired and only need to be connected to the vehicle plug. The vehicle warranty remains intact and the reconstruction to the original condition is possible at any time! Compatible with all models of the R9T series year of manufacture 2014- 2016 and the series with Euro 4 (from model year 2017). Also Urban G/S, Pure, Racer and Scrambler.

Parts delivered :

• • motoscope pro with ca. 70 cm connector cable
  
  
  • 2 stainless steel screws
  
  
  • detailed installation and operating instructions
  
  

No modifications to the vehicle are necessary. No access to the battery or tank is necessary. No further adjustments are necessary. Dismantling is possible at any time.

--

Specifications and features

Length, Height, Depth : 109 mm/ 47 mm/ 11 mm
Weight approx : 100 g
Mounting : 2 x M3 threaded hole
Power consumption during operation : max. 200 mA (load dependent)
Power consumption in standby : 0.4 mA
Operating voltage :  9 V - 15 V
Operating temperature : -20°... +80°C
Rev counter (LED bargraph) : 0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer : 0 – 350 km/h or mph
Trip meter A : bis 999.9 km or mi
Trip meter B : bis 999.9 km or mi
Total mileage (adjustable) : bis 250000 km or mi
Operating hours/Service : 0 – 9999.5 h
Clock : 23:59 h/min
Timekeeping : 0 – 99:59:59 h/min/s
RPM count (numerical) : 0 – 20000 rpm
Adjustable RPM warning (gear shift light) : 0 – 20000 rpm
On-board voltage : 9 – 18 V
Low voltage warning : Warning if below ca. 11V
Timekeeping : 0 - 100 km/h or 0 - 60 mph 0.00 – 30.59 sec.
Actual accelleration : +/- 0.00 – 1.50 G
Average speed : 0 – 350 km/h or mph
Max. speed : 0 – 350 km/h or mph
Max. RPM : 0 – 20000 rpm
Max. positive acceleration : +1.50 G
Max. negative acceleration : - 1.50 G
Gear display : N, gear 1 - 6
Green control LED : Neutral (N)
Green control LED : Turn indicator left/right
Blue control LED : High beam
Red control LED: Miscellaneous warning functions like Check Engine, ABS, low fuel
Fuel/Reserve: low fuel warning